Cleaning Print Carriage; Clean Housing - Reiner jetStamp 790 Mode D'emploi

jetStamp 790/790 MP

5.5. Cleaning print carriage

Ink and dried ink residues on the print carriage can be removed using a soft cloth, soaked in
methylated spirit.

5.6. Clean Housing

CAUTION
Danger of electric shock when liquids enter the inside of the device.
Pull the mains adapter from the socket.
f
Inform specialist dealer or REINER service.
f
NOTICE
Aggressive cleaning agents may damage the housing surface.
Do not use abrasives and plastic-dissolving detergents for cleaning.
f
Clean the housing surface of the device with a soft cloth if required. Slightly moisten the
f
cloth in water with mild detergent at stronger contamination.
86