Selecting Pretext; Recognising And Removing Interferences - Reiner jetStamp 790 Mode D'emploi Succint

jetStamp 790/790 MP
jetStamp 792/792 MP

1.9. Selecting pretext

The following pretexts can be set for the imprints P : 01 to P : 25.
RECVD
SENT
FILE
_ _ _ _ _ (= pretext switched off)
Press [MODE] until [NO/TXT] appears in the display menu bar.
f
Press [NO/TXT].
f
"INPUT - REPETITION" appears.
Press [NEXT] until "INPUT - PRE TEXT" appears in the display menu bar.
f
To select pretext, press [VARY].
f
Press [NEXT] until the required pretext appears.
f
To save selected pretext and to return to the main menu,
f
press [RETURN] twice.
The main menu appears.
1.10. Install 790 PCset easy Software
Installation is only possible with administrator rights on the computer.
Insert 790 PCset easy CD into the drive.
f
If the installation programme does not start up automatically, start the file "setup.exe".
f
Observe the installation programme instructions.
f

1.11. Recognising and Removing Interferences

For more information, see the online help of the PCset easy software, or the enclosed CD.
21
INV. DRAFT
ORDER PAID
ENT.D RECPT
FAX
ORIG
REG.D