Miller Dialarc 250P AC/DC Mode D'emploi page 21

3-11. Placing Jumper Links
Do not overtighten.
2
!
Disconnect and lockout/tag-
out input power before
installing or moving jumper
links.
Check input voltage available at
site.
Remove side panel.
1 Jumper Link Label
Check label − only one is on unit.
2 Jumper Links
Move jumper links to match input
voltage and label on unit.
Reinstall side panel, or go on to
Section 3-12.
Tools Needed:
3/8, 7/16, 1/2 in.
input_3 3/96 - Ref. 802 940
OM-321 Page 17
1