Functional Description; Putting Into Operation - Abicor Binzel ABIPLAS CUT 200 W Mode D'emploi

®
ABIPLAS CUT 200 W/MT
The order data and ID numbers for the equipment parts and wear parts can be found in the
current product catalogue. Contact details for advice and orders can be found online at
www.binzel-abicor.com.

5 Functional description

The torch and power source together form an operating unit which provides a plasma arc for
cutting when supplied with the appropriate operating resources. When cutting, compressed air
is ionised in the cutting nozzle by high-frequency pulses. The initial arc produces conductive
plasma, which is accelerated in the nozzle and directed to the workpiece. The working arc
is struck between the cutting torch electrode and the workpiece. The workpiece material is
melted by the energy of the impact, the dissociation and the ionisation and blown out by the
kinetic energy of the plasma jet.

6 Putting into operation

The plasma cutting torches in the ABIPLAS
cutting of low and high-alloy materials using compressed air for industrial or commercial use by
trained operators. These plasma torches are liquid-cooled cutting torches.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance, servicing,
assembly, disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect all electrical connections.
DANGER
Risk of injury and device damage when handled by unauthorised persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorised persons.
• Only qualified personnel are permitted to perform work on the device or system.
NOTICE
• Please take note of the following instructions:
 3 Product description on page EN-4
BAL.0120 • 2021-08-20
®
CUT 200 series are exclusively intended for the
5 Functional description
EN - 9