Designated Use; Personal Protective Equipment (Ppe); Classification Of The Warnings - Abicor Binzel ABIPLAS CUT 200 W Mode D'emploi

®
ABIPLAS CUT 200 W/MT
1 Identification
The ABIPLAS
solely used in industry for plasma cutting and gouging. Its operation requires a cutting power
source with an integrated coolant recirculator or a separate coolant recirculator. These
operating instructions only describe the ABIPLAS
®
ABIPLAS
ABICOR BINZEL spare parts.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
2 Safety
The attached safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the
manner described in these instructions. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are not permitted.

2.2 Personal protective equipment (PPE)

To avoid danger to the user, these instructions recommend the use of personal protective
equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective
gloves and safety shoes.

2.3 Classification of the warnings

The warnings used in the operating instructions are divided into four different levels and shown
prior to potentially dangerous work steps. Arranged in descending order of importance, they
have the following meanings:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely
critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
BAL.0120 • 2021-08-20
®
CUT 200 W/MT plasma cutting torch is a liquid-cooled cutting torch that is
CUT 200 W/MT plasma cutting torches must only be operated using original
®
CUT 200 W/MT plasma cutting torch.
1 Identification
EN - 3