Signs And Symbols Used; Symbol Description; Nameplate; Scope Of Delivery - Abicor Binzel ABIPLAS CUT 200 W Mode D'emploi

4 Scope of delivery

3.3 Signs and symbols used

The following signs and symbols are used in the operating instructions:

Symbol Description

• Bullet symbol for instructions and lists
 Cross reference symbol refers to detailed, supplementary or further information
1
Step(s) described in the text to be carried out in succession

3.4 Nameplate

The plasma cutting torches are labelled as follows:
1
1 Nameplate
Fig. 1
Nameplate
When making enquiries, please note the following information:
Type label on the torch handle, for example ABIPLAS
torch.
The machine cutting torch is labelled ABIPLAS
 Fig. 4 Overview of the clamping area on page EN-12
4 Scope of delivery
The standard scope of delivery includes the following components:
• Cutting torch body (type as ordered)
• Can of grease for lubricating the O-rings
1
• Equipment parts
• Cable assembly
Tab. 9
Scope of delivery
1in standard or special versions
EN - 8
ABIPLAS
2 ABICOR BINZEL label
®
CUT 200 W on the manual cutting
®
CUT 200 W MT on the torch body.
• Handle with switching unit (manual torch) or
handle tube (machine torch)
• Central connector and connections
• Operating instructions
®
CUT 200 W/MT
2
BAL.0120 • 2021-08-20