Storage; Troubleshooting; Technical Data; Disposal - SilverCrest SDB 2400 F4 Mode D'emploi

■ Clean the housing with a soft, dry cloth only .
■ Clean the sole of the iron q using a damp cloth and a mild, non-scouring
detergent .

Storage

■ Store the cooled-down appliance in a clean, dust-free and dry location .

Troubleshooting

Problem
The steam iron blasts
out no steam/very little
steam
The steam iron does not
get hot .
The steam iron is defective .

Technical data

Supply voltage:
Max . power consumption:

Disposal

never dispose of the appliance in your normal domestic waste .
This product is subject to the provisions of European Directive
2012/19/Eu .
Dispose of the appliance through an approved disposal facility or your municipal
waste facility . Please observe the currently applicable regulations . Please contact
your waste disposal facility if you are in any doubt .
Dispose of all packaging materials in an environmentally friendly manner .
SDB 2400 F4
cause
The reserves of tap
water in the steam iron
are depleted .
The steam iron is not
plugged in or is not
switched on .
220–240 V ~ , 50/60 Hz
2020–2400 W
Solution
Fill the water tank with
tap water (See Filling
the water tank) .
Insert the plug into a
wall power socket and
adjust the temperature
control 8 to the desired
ironing temperature .
Arrange for the steam
iron to be repaired by
qualified specialists .
GB │ IE │ 25 ■