Cleaning; Storage - SilverCrest SDBR 420 A2 Mode D'emploi

Cleaning

RISK OF ELECTROCUTION!
► Remove the plug before cleaning the appliance. There is a risk
of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before cleaning it.
Otherwise, there is risk of burns!
CAUTION! PROPERTY DAMAGE!
► Do not use aggressive, abrasive or chemical cleaning agents.
They can damage the surface and also lead to irreparable
damage to the appliance.
■ Clean the housing with a soft, dry cloth only.
Clean the sole of the iron 8 using a slightly damp cloth. For
■
stubborn dirt, add a little mild detergent to the cloth. Afterwards,
wipe clean with a cloth moistened only with water to ensure that
no detergent residue remains.

Storage

RISK OF INJURY!
► Allow the appliance to cool down. Otherwise, there is risk of
burns!
■ Empty the remaining water out of the water tank by opening the
filler opening 1 on the water tank, turning the appliance upside
down over a sink and rocking it gently.
Wrap the power cable around the cable retainer q. Guide the
■
end of the cable through the cable clip 0 so that the cable is
retained.
Place the iron in the case e and close the zip.
■
SDBR 420 A2
GB │ IE │
13 ■