Publicité
Les langues disponibles
Les langues disponibles
This is a 12-hour clock.
1. Press CLOCK SET/START or START.
2. Press number pads to set time of day.
3. Press CLOCK SET/START or START.
1. PressTIMER
SET/START.
On models with electronic oven control Style 1, press again
to switch from MIN/SEC and HR/MIN.
2. Press the number pads to set length of time.
3. Press TIMER SET/START to start the timer.
When the set time ends, timer completion tones will sound,
then reminder tones will sound every 10 seconds.
4. Press TIMER OFF anytime to cancel the Timer and/or stop
reminder tones.
The Timer counts down the set time. On models with electronic
oven control Style 1, the timer can be set in minutes and seconds
Remember, if OFF is pressed, the oven will turn off.
or hours and minutes.
5. The time can be reset during the countdown
by repeating the
NOTE: The Timer does not start or stop the oven.
above steps.
OPTIONS-
STYLE 1
The OPTIONS selection pad allows you to access special
functions within the Electronic Oven Control that allow you to
customize the product to your needs. These special functions
allow you to change the oven temperature between Fahrenheit
and Celsius, turn the audible signals and prompts on and off, and
adjust the oven calibration. The Sabbath Mode is also set using
the OPTIONS selection pad.
To Use: Press OPTIONS. The oven display will scroll through the
various options, starting at 1 and ending in 7. You can also press
the OPTIONS selection pad and number pad to quickly access
the desired hidden function.
OPTIONS
SPECIAL FUNCTION
1
Fahrenheit and Celsius conversion
Tones On and Off
Tones High and Low
Cooking Time Completion Tones On and
Off
Oven Temperature Calibration
Sabbath Mode
Press options, then 1 on the keypad for Celsius. Repeat to
convert back to Fahrenheit.
Preheat Completion Tone
One chime indicates a preheat cycle has been completed.
All Tones
All tones are preset ON, but can be turned OFF. To turn tones ON,
press the options key, then press keypad 2. To turn tones OFF,
press the options key again, and then press keypad 2.
Tone Volume
The volume is preset at high, but can be changed to low.
To Change:
Press OPTIONS, and then 3 to lower the volume.
Press OPTIONS, and then 3 to raise the volume of the tones.
IMPORTANT:
Do not use a thermometer
to measure oven
temperature because opening the oven door during cycling may
give incorrect readings.
The oven provides accurate temperatures;
however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a sign means the oven will be warmer by
the displayed amount. Use the following chart as a guide.
ADJUSTMENT
°F
COOKS FOOD
(AUTOMATIC °C CHANGE)
10°F (5°C)
...a little more
Tones are audible signals, indicating the following:
One beep
•
Function has been entered
20°F (10°C)
...moderately
more
35°F (15°C)
...much more
-10°F (-5°C)
...a little less
-20°F (-10°C)
...moderately
less
Three beeps
•
Invalid pad press
Timer Completion
Tones
Four chimes occur when the timer reaches zero. This can occur
when using the timer for functions other than cooking.
Cooking Time Completion
Tones
Three beeps indicate the end of a cooking cycle.
To turn On/Off: Press OPTIONS, and then 4 to turn OFF. Press
OPTIONS, and then 4 to turn ON.
-35°F (-15°C)
...much less
To Adjust Oven Temperature
Calibration:
1. Press OPTIONS, and then 6 to set the calibration.
2. Press 3 to increase the temperature,
or press 6 to decrease
the temperature.
3. Press START to end calibration.
13
Publicité
