Panasonic EYFMH1WC Instructions D'utilisation page 92

3.3 PAIRING WITH THE CONTROLLER
Cancelling Pairing
Use the Pairing key on the controller unit (EYFRW2).
Select the communication lamp of the tool number you want to cancel registration (lamp
on) and hold the pairing key down to cancel pairing registration.
█ To cancel Tool No. 4
1
Press the Pairing key on the controller 4 times to select Tool No. 4.
Communication lamp No. 4 blinks.
2
While No. 4 is selected, hold down the Pairing key on the
controller to cancel pairing registration of Tool No. 4.
When pairing is cancelled, Communication lamp No. 4 stops blinking and turns off.
Note
• You can cancel pairing by setting in the setting screen in addition to using the key on the unit.
• For how to cancel pairing in the setting screen and details on operation of the controller, see the
Operating Instructions supplied with the controller.
EN
Communication lamp
Pairing key
Registered
(on)
Selected
(blinking)
- 92 -
Selected
(blinking)
No registration
(off)