Panasonic EYFMH1WC Instructions D'utilisation page 19

2.1 BASIC OPERATION
2.1.3 HOW TO USE
1 Choose forward or reverse with the forward/reverse lever, and
turn on the trigger switch.
• Trigger switch pull-in operation may delay the startup of rotation for a moment,
which is not a failure.
• In case of quick ON/OFF, the rotation startup will be late a little for that.
• If you keep pulling the trigger switch to make rotations continuously, the tool may
come to an error (EA) stop automatically because the recordable data per work
exceeds the upper limit.
• The operating temperature range of lithium-ion battery packs is 0 °C to 40 °C.
If a cold battery pack that is 0 °C or below is used as it is in cold regions etc., the
tool may not operate normally. In this case, before use, leave the battery pack in
a place that is 10 °C or above for 1 hour or more to raise its temperature. After the
temperature has risen, use the battery pack.
For about 1 second just after a battery pack is
attached, trigger switch pull-in operation is not
accepted.
CAUTION
• Wait for the motor to stop, before operating the forward/reverse lever.
Operating it while the motor has not stopped completely will cause a failure.
EN
- 19 -
Continued to the next page
Forward
Reverse