Panasonic EYFMH1WC Instructions D'utilisation page 42

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.8 CONFIGURING PARAMETERS OF THE TOOL
█ Selecting the parameter file saved in CSV file format
(
Refer to (8) in this section
1 Select Parameter on the display change tab (①), and click
[Import Parameter File] (②).
When Open File Dialog is displayed, select the CSV file that has a parameter file to edit.
2 The selected parameter file is newly added to the parameter list
(③), so click that parameter file.
█ Newly creating a parameter file and selecting the file
When you select [Create New] in the upper part of the parameter list (①), the [Copy
Parameter] window opens, where you can enter a parameter registration name and a
supplementary comment.
They will be registered by clicking [Add] (②).
( The registration name and the supplementary comment each can be up to 25 one-byte
characters or 15 two-byte characters long.)
( The registration name may not include the letters \, /, :, *, ?, ", <, and >. Moreover, the
registration name may not begin with a space.)
① ●
Note
• Model number of the parameter is automatically set to the number of the selected tool on
tool list.
• Each parameters are in the default values of the selected tool model when the new
parameter file is created.
EN
for how to export the parameter file to CSV.)
① ●
② ●
② ●
- 42 -
③ ●