Panasonic EYFMH1WC Instructions D'utilisation page 76

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.12 DISPLAYING AND SAVING THE HISTORY LOG
Make a Tool Setting While Browsing the Graph Data
• When you select [Tool Settings] (①) above the window, the setting window will open.
• Some parameters can be configured from the setting window.
(For how to configure each parameter,
• To configure parameters that are not displayed on the setting window, click [Parameters]
(②) to move to the Parameter tab.
• When you click [Write to Tool] (③), the set parameter file will be registered to the tool
selected on the tool list (④).
(The parameters that were not configured in this setting window will remain in their
original state, without being changed.)
② ●
EN
Refer to 2.2.8 .)
③ ●
- 76 -
① ●
④ ●