Panasonic EYFMH1WC Instructions D'utilisation page 24

2.1 BASIC OPERATION
2.1.5 CONTROL PANEL FUNCTIONS
How to Read the Battery Indication Lamp
• You can check the remaining battery level.
• Use the remaining battery level for reference,
because it varies somewhat with the ambient
temperature, battery properties, etc.
Status display
Blinking
Blinking
※ See below for description of the auto power-off function.
Auto Power-off Function
Status display
Blinking
Note
• When auto power-off functions, all the three segments of battery indication lamp will blink.
Moreover, the tightening confirmation lamp will also light up in red.
• When the lamp blinks, charge the battery pack immediately (or replace it with another
battery pack that is charged).
• The battery pack where auto power-off functioned should be charged until charging is
completed. If charging is not enough, the auto power-off function may not be canceled.
EN
Remaining battery level
Full
About 40% or less
About 20% or less (Time to charge)
⇒ Charge the battery pack early.
No remaining battery level
⇒ Charge the battery pack. (
This is a function to shut off power to the tool when battery voltage
dropped to a certain standard. When it functions, even if you pull the
trigger switch, the tool will not move until you charge the battery pack
(or replace it with another battery pack that is charged).
※ Auto power-off functioning)
- 24 -
Battery indication lamp