Panasonic EYFMH1WC Instructions D'utilisation page 82

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.13 HISTORY LOG ITEM LIST
Snug Torque Detection Delay
[Display overview]
This shows the configured parameter of the function for the tool ignoring the work load
in the middle of tightening before the set time has passed since trigger-on.
Error Message
[Display overview]
When the reason for NOK, the work result displayed on the NOK message, is classified
as Error, details of the error are displayed.
(For details of error messages, .)
Refer to 4.3.1
- 82 -
EN