Panasonic EYFMH1WC Instructions D'utilisation page 46

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.8 CONFIGURING PARAMETERS OF THE TOOL
4 Remove the tool from the USB cable once, and do a tightening
work on the torque tester or the actual bolt.
5 Check the torque result shown by the torque tester or the torque
wrench which retightened the actual bolt (Audit Torque Value).
EN
Remove the USB cable.
50.0 Nm
- 46 -
50.0 Nm
Continued to the next page