1.6 CHARGING
Before Charging
You can charge a sliding lithium-ion battery pack.
(Charging EYFB41 or EYFB43)
Install a battery charger in a place with a temperature of 5 °C to 40 °C, and charge
the battery pack that is close to the temperature of the charging place.
If the battery pack temperature is 5 °C or below or significantly different from the
charging place temperature, there may be a lack of charging. Leave it in that place
for 1 hour or more before charging.
Attention
• If you have charged two battery packs in a row, stop charging for about 30 minutes.
Wait for the battery charger temperature to fall before charging.
• If you do not hear a fan running just after inserting a battery pack, the battery charger
may be potentially out of order. Request repair immediately.
Note
• The battery charger controls its cooling fan according to the battery pack temperature and
the charging mode. The fan operation changes during charging, which is not a failure.
• Even after pulling out the power plug, the power lamp may be lit for about 10 seconds,
which is not a failure.
Temperatures mentioned in this Operating Instructions are for reference. Actually,
they may vary somewhat depending on conditions.
EN
- 12 -