Télécharger Imprimer la page

Husqvarna BMS 280P Manuel D'utilisation page 24

Publicité

Les langues disponibles

Les langues disponibles

4. To lift the product with a forklift, put the forklift blades
through the brackets (B).
To attach the product to a
transportation vehicle
1. Put wheel chocks at the wheels to prevent
movement during transportation.
2. Attach tie-down straps to the lifting eyes.
3. Attach and tighten the tie-down straps to the
transportation vehicle.
4. Make sure that the product cannot move.
To install the front wheel dolly to the
product
1. Put the front wheel dolly (A) in front of the product.
A
2. Remove the bolt (B) and the large washer (C).
24
B
C
B
3. Install the front wheel dolly (A) to the product.
A
4. Install the bolt and washers and tighten the bolt.
Storage
CAUTION:
storage outdoors. Always keep the product
indoors.
WARNING:
parked safely.
Keep the product in a dry and frost free area.
Clean the product and do a complete servicing
before you put the product in storage.
Keep the product in a locked area to prevent access
for children or persons that are not approved.
Remove the LPG tank before storage. Do not put
the product in storage outdoors. Always keep the
product indoors.
Always store LPG tanks outside. Remove all
propane tanks from inside the building except during
equipment use. Store the propane tanks in a secure
and well ventilated area.
Disposal
Symbols on the product or the packaging of the product
indicate that this product cannot be handled as domestic
waste. It must be submitted to an appropriate recycling
station for the recovery of electrical and electronic
equipment.
Make sure to disconnect the propane tank and remove
the battery from the product before submitting to an
B
Do not put the product in
The product must be
1998 - 002 - 14.12.2023

Publicité

loading