Publicité
Les langues disponibles
Les langues disponibles
3. Remove the hydraulic oil drain plug (A).
4. Remove the hydraulic oil filter cover.
5. Turn the hydraulic oil filter counterclockwise to
remove it.
1998 - 002 - 14.12.2023
A
6. Remove the hydraulic oil cap (B).
7. Lightly lubricate the rubber seal on the new hydraulic
oil filter with new hydraulic oil.
8. Attach the hydraulic oil filter. Tighten by hand until
there is resistance, then tighten ¾ turn more.
9. Install the hydraulic oil drain plug when the hydraulic
oil tank is empty.
10. Fill the hydraulic tank until you can see the hydraulic
oil level is filled to the middle in the hydraulic oil level
To do a check of the hydraulic oil
indicator. Refer to
level on page 20 .
11. Install the hydraulic oil cap.
12. Operate the product for a short time to ventilate the
system.
13. Do a check of the hydraulic oil level.
B
21
Publicité
