Publicité
Les langues disponibles
Les langues disponibles
Error code number
0352
61
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
WARNING:
transportation of the product.
CAUTION:
behind a vehicle.
•
Lift the product or use a front wheel dolly (optional
accessory) to move it shorter distances. Refer to
Accessories on page 27 .
•
For longer distances, put the product on a
transportation vehicle.
•
Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
To move the product up and down a
ramp
WARNING:
move the product up and down ramps. The
product is heavy and there is a risk of injury
if the product falls or moves too quickly.
WARNING:
slope, always use a winch. Do not walk or
stay below or near the product.
•
To move the product down a ramp, operate the
product forward slowly.
•
To move the product up a ramp, operate the product
rearward slowly.
•
Do not turn the product to the left or to the right more
than 45° on a ramp.
1998 - 002 - 14.12.2023
Cause
The cylinder 2 ignition coil malfunction
due to broken wire in harness (may not
be visible), shorted connection or faulty
sensor.
End of code transmission.
Transportation, storage and disposal
Be careful during
Remove the tool before
Do not tow the product
Be very careful when you
For ramps with a steep
Solution
Consult the service manual of the engine
and speak to Husqvarna servicing dealer.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product. Keep bystanders
away from the risk area. Refer to
safety on page 8 .
WARNING:
product. Make sure that the lifting eyes are
correctly installed and not damaged.
1. Remove the tool.
2. Attach the lifting equipment at the lifting eyes (A).
A
Note:
There are 2 lifting eyes at each side and 2
lifting eyes at the back of the product.
3. Lift the product slowly.
Make sure that the lifting
Do not walk or stay below
Work area
Do not lift a damaged
A
23
Publicité
