Publicité
Les langues disponibles
Les langues disponibles
General product maintenance
Do a general inspection.
Make sure that all screws and nuts are tightened with the correct torque.
Do a check for oil leaks.
Do a check of the hydraulic oil level. Refer to
level on page 20 .
Do a check of the wear and function of the front wheels.
Replace the hydraulic oil. Refer to
filter on page 20 .
Do a complete servicing and cleaning of the product.
Clean the internal components of the product.
Engine maintenance
Do a check of the engine oil level.
Examine the air filter. Clean the air filter if it is necessary.
Clean the air filter.
Replace the engine oil and the oil filter.
Replace the air filter.
Clean the cooling fins of the engine
To do a general inspection
•
Make sure that the nuts and screws on the product
are tightened.
•
Make sure that the cables on the product are not in a
position where they can become damaged.
•
Examine the electrical parts for damage. Do not
operate a product that has damaged electrical parts.
To clean the product
•
Always clean all the equipment after use. Use a
vacuum cleaner.
•
Do not use a high-pressure washer to clean the
product.
•
Keep the air openings clean and clear to make
sure that the product always has sufficiently cool
temperature.
16
To do a check of the hydraulic oil
To replace the hydraulic oil and hydraulic oil
Daily
Daily
To clean the engine and the muffler
CAUTION:
manual of the propane engine before you do
maintenance in the product.
•
Let the engine become cool before you clean it.
•
Clean the engine with a cloth.
•
Make sure that the cold air intake grille is not
blocked. Remove dirt with a soft brush.
To replace the blade
WARNING:
blades are very sharp.
WARNING:
cannot start when you replace the blade.
Each
Week-
12
ly
month
s
X
X
X
X
X
X
O
O
Each
Week-
12
ly
month
s
X
X
X
X
X
O
Always read the service
Use protective gloves. The
Make sure that the product
1998 - 002 - 14.12.2023
12 h
after
servic-
ing
X
12 h
after
servic-
ing
Publicité
