Publicité
Les langues disponibles
Les langues disponibles
Tighten all nuts, bolts and screws except
the carburetor adjustment screws after
each use.
For maintenance items please also refer
to the maintenance chart in this
instruction manual.
Store the power tool in a dry and high or
locked location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the machine" in this
instruction manual.
Store fuel in an approved and properly
labeled safety-type canister only. Take
care when handling gasoline! For health
and safety reasons, avoid direct contact
with the skin and avoid inhaling fuel
vapor!
Maintenance, replacement, or repair of
the emission control devices and
systems may be performed by any
nonroad engine repair establishment or
individual. However, if you make a
warranty claim for a component which
has not been serviced or maintained
properly, STIHL may deny coverage.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of the instruction
manual.
BG 50
Assembling the Blower
Mounting the Blower Tube
3
2
Push the blower tube (1) with lug (2)
N
into the fan housing stub (3) and
rotate it in the direction of the arrow
to lock in position.
Removing the Blower Tube
1
Use a suitable tool to lift the tab (6)
N
on the fan housing stub (3).
Rotate the blower tube in the
N
direction of the arrow and then pull it
out.
English
6
3
7
Publicité
