Publicité
Les langues disponibles
Les langues disponibles
English
Open the cap.
N
Fill up with fuel.
N
Close the cap.
N
WARNING
After fueling, tighten down the filler cap
as securely as possible by hand.
10
Starting / Stopping the
Engine
Starting the Engine
Observe safety precautions.
N
Press the fuel pump bulb at least
N
five times – even if the bulb is
already filled with fuel.
1
2
Move the stop switch (1) to the run
N
position I
Setting the choke lever
If the engine is cold
3
Move the choke lever (3) to g
N
Pull the throttle trigger (2) and hold it
N
there.
Crank engine until it begins to fire.
N
Move the choke lever (3) to e
N
Pull the throttle trigger (2) and hold it
N
there.
Continue cranking until the engine
N
runs.
If the engine is warm
Also use this setting if the engine has
been running but is still cold.
Move the choke lever (3) to e
N
Pull the throttle trigger (2) and hold it
N
there.
Continue cranking until the engine
N
runs.
BG 50
Publicité
