B7 - Blocking Front Tires; Check And Maintenance - Kiva MAXIMA Manuel D'utilisation

B7
BLOCKING THE FRONT TIRES
13
FR
EN
A
For a stabile progress on the slope, block
the front tires with axle (12) Beta pin(13).
Stop the engine and disconnect spark plug wire and before performing any maintenance to
prevent accidental starting of engine.
To avoid fire, keep the engine free of grass, leaves, spilled oil or fuel.
C1
FORWARD CLUTCH BELT AND WIRE ADJUSTMENT
18
Remove the belt cover (18).
D
Adjust the belt tension by acting on the ten-
sion nuts (14) of the cable at the level of the
handlebars.
28
12
12
13
B
Position the axis (12) in the hub of the wheel
pivot and put the Beta pin (13).

CHECK AND MAINTENANCE

A
Keep the clutch lever (3) engaged, using a
rope.
14
Stop the engine and disconnect the spark plug before any intervention.
After adjusting the belt tension, verify the position of the control lever in neutral and start
the engine. Make sure that the belt quickly stops when the clutch control lever is relea-
sed. If this one does not stop quickly, adjust the belt guide and readjust the clutch cable.
The average effort on the forward clutch control lever has to be between 50 and 70 N (5
in 7 kg) by pressing in the central part of the control lever.
OPERATION
3
B
C
Adjust the bend to become between 10 to
15 mm when push center of V-belt.