A6 - Handle Adjustment; A7 - Tines Installation - Kiva MAXIMA Manuel D'utilisation

A6
HANDLE ADJUSTMENT
The adjustment of the handlebars height can be made on two levels by changing the position of the back fixation hole.
FR
EN
Handle fixed in low position (1) when the shipment.
A7
TINES INSTALLATION
4
24
PREPARING THE MACHINE
1
3
2
1
2
Handle fixed in high position (2)
Tines (1) are installed on metallic furniture in two,
back to back. They are fixed with screw (2), washer
(3) and nut (4).
For fixing nut (4), make sure of following points:
•
At least two screws of bolt go over the end of nut.
•
Tines (1) must not be blocked in their supports
and keep free.
NOTE:
Check tines, screws and fixing bolts, in every 30
hours of use.
Change tines when they are damaged or worn.