A3
OIL FILLER AND ENGINE LEVEL
Engine oil drain plug
Engine is shipped without oil.
A4
TRANSMISSION FILLING AND LEVEL
1
The transmission is delivered without oil.
A5
FUEL TANK FILLING
PREPARING THE MACHINE
IMPORTANT
2
Remove oil filler plug (1) and fill with 2.2 liters of EP SAE 80 W 90 oil. (oil
level has to touch the hole of the filling plug).
NOTE : Check the oil level before each use.
IMPORTANT
1
Remove the filling plug (2) and fill with 1 liter of SAE 10W-30
oil upper grade than SE-API class.
Fill with recommended engine oil up to the upper limit.
Watch not to let penetrate impurity into the engine.
NOTE : Check the oil level before each use.
Transmission draining plug
Use flesh clean, unleaded gasoline only.
Capacity of fuel tank : 6.1L
Do not remove the strainer from fuel tank
when filling.
With the crank (1) adjust the
regulation of the machine
cutting height to position
engine in horizontal.
FR
EN
23