B6 - Adjustment Of Mowing Height; B5 - Mowing; B4 - Turning The Machine - Kiva MAXIMA Manuel D'utilisation

B4
TURNING THE MACHINE
A
To change direction, place throttle control
(4) to LOW position.
B5
MOWING
A
Move the throttle control (4) to HIGH
position.
D
Grip the coupling clutch lever (3) to start
moving.
B6
MOWING HEIGHT ADJUSTMENT
B
4
8
Grip the side clutch lever (8) or (9) on the
side to where you turn.
4
B
Move shift lever (2) to position 1.
The 3rd speed is to be only used for
3
the movements with the disconnec-
ted flail.
NOTE:
Choice of the speeds of progress in the
work:
1st: very heavy and very sloping works
2nd: light works
•
Before putting into gear the rotation of the
flail, put the driving rate at most.
•
When abnormal vibrations appears, stop
the engine and check tines.
To adjust mowing height, move front tires.
•
When you turn the handle (11) to the left, mowing height will be lower : min. 50 mm.
•
When you turn the handle (11) to the right, mowing height will be higher : max. 100 mm.
11
OPERATION
9
2
NOTE:
By tightening control lever (8) the machine
makes a change of direction towards the left
and if you use the control lever (9) the
change of direction is made towards the
right.
These two control levers must not
be used at the same time.
24
C
Press and maintain the unbolting control lever
(24) then press on the control lever (10), after
flail clutching it is enough to maintain the
control lever (10) in low position.
On a slope:
•
Do not operate the machine on the slope
over 25° of inclination.
•
Put spike shoes.
•
In a slope avoid working by rising (risk of
capsizing) but rather by coming down.
•
Make sure that there is not holes, rocks or
other obstacles.
•
Move horizontally and turn on a gentle
slope.
•
Do not operate on the sharp slant even
with an assistant person.
FR
EN
10
27