Stihl RMI 422.2 Manuel D'utilisation page 162

The opened flap can be removed
upwards from the machine. This
design is implemented for safety
reasons: this ensures that the
machine cannot be lifted and
carried by the flap.
Closing the flap:
Carefully fold the flap downwards and
allow to engage.
The robotic mower can only be
operated when the flap is fully
engaged.
15.3 Adapting the programming
The current programming can be seen in
the mowing plan or, in the case of the
model RMI 422 PC, in the iMOW® app.
( 11.7)
The mowing plan is calculated based on
the size of the mowing area during
installation or during the creation of a new
mowing plan.
The active times and the mowing
duration can be changed individually.
With the mow plan type Standard the
robotic mower mows and charges
precisely within the active times, with the
mow plan type Dynamic the necessary
mowing operations are automatically
distributed over the possible active times.
If required, several mowing or charging
operations can run during an active time. If
desired, the edge of the mowing area can
be cut automatically at regular intervals.
( 11.13)
Up to three different active times per day
are possible. ( 11.7)
If the robotic mower has to travel to
specific areas of the mowing area, starting
points must be defined. (
160
If the mow plan type Dynamic is
selected, not all the active times
may be necessary for optimal lawn
care under certain circumstances
(e.g. warm weather or generous
time window).
Changing the active times: (
– Additional active times for further
mowing operations
– Adapting the time window, e.g. to
prevent mowing during the morning or
night.
– Omitting individual active times
because the mowing area is e.g. being
used for a party.
Extending the mowing duration: (
– There are areas which are not mown
sufficiently, e.g. because the mowing
area has many corners.
– Intensive grass growth during the
growing period
– Particularly dense lawn
Reducing the mowing duration: (
– Reduced grass growth due to heat, cold
or dryness
Creation of a new mowing plan: (
– The size of the mowing area has been
changed.
New installation: (
– New location of the docking station.
– Initial operation on a new mowing area.
11.14)
15.4 Automatic mowing
● Switching on automatic
11.7)
● Starting mowing operation:
11.7)
● Ending mowing operation:
11.7)
11.7)
9.6)
15.5 Mowing independently of active
times
● Activate the docked robotic mower by
mowing:
When automatic mowing is
switched on, the Automatic
symbol appears next to the battery
symbol on the display. (
With the mow plan type Standard, the
robotic mower sets off at the beginning
of each active time and mows the lawn.
With the mow plan type Dynamic, the
mowing operations are automatically
distributed between the available active
times. ( 11.7)
When the battery is discharged, the
robotic mower automatically travels
back to the docking station. (
A running mowing operation can be
ended manually at any time using the
STOP button or the "Drive home"
menu. ( 5.1)
Activating Homecall on the docking
station also ends the running mowing
operation immediately. (
RMI 422 PC:
The mowing operation can also be
ended using the app – send the robotic
mower to the docking station. (
Mowing areas that the robotic
mower reaches via a corridor are
only mown if starting points have
been defined in the relevant area.
pressing a button. This also switches on
the docking station.
0478 131 9963 F - EN
11.7)
15.6)
13.1)
10.)