Publicité
Les langues disponibles
Les langues disponibles
4 Time:
Set the current time.
The set time must correspond to the
actual time in order to prevent inadvertent
mowing by the robotic mower.
RMI 422 PC:
The time can also be set using the
app. (
10.)
5 Date:
Set the current date.
The set date must correspond to the
actual calendar date in order to prevent
inadvertent operation of the robotic
mower.
RMI 422 PC:
The date can also be set using the
app. (
10.)
6. Date format:
Set the required date format.
7. Language:
Set the required display language.
The language selected during initial
installation is set as the default.
8. Contrast:
The display contrast can be
adjusted as required.
9. Energy mode
(RMI 422 PC):
In Standard, the robotic mower is
connected to the Internet at all times and
can be reached using the app. (
In ECO, radio communication is
deactivated during rest periods to reduce
energy consumption; the robotic mower
cannot be reached using the app. The
most recent available data is shown in the
app.
142
11.11 Setting the rain sensor
In order to set the 5-stage
sensor, press the control pad to
the left or right. The current
value is displayed in the "Settings" menu
by means of a line diagram.
Moving the control influences
– the sensitivity of the rain sensor,
– the time the robotic mower waits for the
sensor surface to dry following rain.
In the case of medium
sensitivity, the robotic
mower is ready for operation
under normal ambient
conditions.
Move the bar further to the
left for mowing at a higher
humidity. If the bar is moved
all the way to the left, the
robotic mower will mow even
in wet external conditions and will not
interrupt the mowing operation if rain drops
land on the sensor.
Move the bar further to the
right for mowing at a lower
humidity. If the bar is moved
all the way to the right, the
robotic mower will only mow if
the rain sensor is completely dry.
10.)
11.12 Setting the status screen
In order to set the status screen, select the
left or right screen with the control pad and
confirm with OK.
Charge state:
Shows the battery symbol with the
charge state in percent
Rem. time:
The remaining mowing duration
during the current week in hours and
minutes. This display is only available with
the mow plan type "Dynamic".
Time and date:
Current time and current date
Start time:
Start of the next planned mowing
operation. During a running active
time, the text "active" is displayed.
Mowing ops:
Total number of mowing operations
performed
Mowing hours:
Duration of all mowing operations
performed
Distance:
Total distance covered
Network
(RMI 422 PC):
Signal strength of the mobile radio
connection with network ID. A small
x or question mark indicates that the
robotic mower is not connected to
the Internet. (
11.3), (
11.18)
GPS reception
(RMI 422 PC):
GPS coordinates of the robotic
mower. (
11.18)
11.13 Installation
1. Passage:
Switch offset drive home on and off.
When the passage is activated, the robotic
mower travels back home to the docking
station, offset at a distance, along the
perimeter wire.
0478 131 9963 F - EN
Publicité
