Télécharger Imprimer la page

Stihl RMI 422.2 Manuel D'utilisation page 161

Publicité

Les langues disponibles
  • FR

Les langues disponibles

During the active times, third
parties must keep out of the danger
area. The active times should be
adapted accordingly.
Moreover, the applicable local
regulations on the use of robotic
mowers as well as the information
in the "For your safety"
section (
6.1) must be observed
and the active times changed
accordingly in the "Mowing plan"
menu as required. (
In particular, you should check the
times of the day and night at which
it is permissible to use the machine
with the responsible authorities.
14.4 Mowing duration
The mowing duration specifies how many
hours per week the lawn is to be mown. It
can be extended or reduced. (
The mowing duration corresponds to the
time during which the robotic mower mows
the lawn. Times during which the battery is
charged are not part of the mowing
duration.
During initial installation, the robotic
mower automatically calculates the
mowing duration based on the specified
size of the mowing area. This reference
value is based on a normal lawn under dry
conditions.
Mowing performance:
2
For 100 m
, the robotic mower needs on
average:
RMI 422:
RMI 422 P,
RMI 422 PC:
0478 131 9963 F - EN
14.5 Home area (RMI 422 PC)
The robotic mower identifies its location
using the built-in GPS receiver. During
each edge following run to check the
correct wire routing (
learning the starting points (
robotic mower stores the coordinates of
the most westerly, easterly, southerly and
northerly point.
This area is defined as the home area and
11.7)
the robotic mower can be used here. The
coordinates are updated each time edge
following is repeated.
When GPS protection is activated, the
owner of the machine is notified if the
machine is operated outside the home
area. The PIN code is also requested on
the robotic mower display.
11.7)
15. Operating the machine
15.1 Preparation
An installation assistant is available
for initial installation. (
The robotic mower should be
charged and operated at an
ambient temperature between +5°C
and +40°C.
● Install the docking station (
● Route (
perimeter wire
● Remove foreign bodies (e.g. toys,
120 minutes
tools) from the mowing area
100 minutes
● Charge the battery (
● Set the time and date (
9.12) and when
11.14), the
9.)
9.8)
9.9) and connect (
9.10) the
15.7)
11.10)
● Check the mowing plan and adapt if
necessary – in particular it must be
ensured that third parties keep away
from the danger area during active
times. (
11.7)
Cut very high grass short using a
conventional lawn mower prior to
use of the robotic mower
(e.g. following a lengthy break).
15.2 Flap
The robotic mower is equipped with a flap
which protects the display from the
weather and from inadvertent operation. If
the flap is opened during use of the robotic
mower, operation is stopped and the
mowing blade and robotic mower come to
a standstill.
Opening the flap:
For safety reasons, the Stop button
must be pressed before opening
the flap during operation of the
robotic mower.
Grasp the flap (1) at the lifting point (A)
and release upwards by pulling lightly.
Open the flap as far as the stop.
159

Publicité

loading

Ce manuel est également adapté pour:

Rmi 422 pRmi 422 pcRmi 422Rmi 422.2 pRmi 422.2 pc