Güde GADH 254/400V Traduction Du Mode D'emploi D'origine page 37

Symbols
Read the Operating Instructions
Unplug the machine before any work
on it.
Safety gloves to be used!
Wear a respirator!
Wear eye protective goggles !
Wear ear protectors!
Safety shoes to be used
Warning/caution!
Warning against dangerous electric
voltage
Caution! Danger of injury from planing
blades.
Warning against thrown-off items
Remove all undesirable items, e.g. nails
and wire, before working
Do not reach into the danger area of the
moving blades.
Always keep children and unauthorised
persons out of reach of the appliance.
Do not expose the appliance to rain
and do not use it in wet or moisture
conditions.
TÜV / GS conformity mark
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Batteries, oil, and similar substances must
not enter the environment.
Protect against humidity
This side up
Safety Instructions
WARNING
Read all safety warnings and all instructions, inclu-
ding those given in the accompanying brochure.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save
all warnings and instructions for future reference.
Caution! The machine must be secured to the
floor using suitable screws since otherwise there
is a risk that it will tip over.
Switch the engine off and unplug it if you are not
working with the appliance or when leaving the
appliance or adjusting, maintaining or repairing it.
When being operated, the machine must stand on a
horizontal and flat surface and the floor around the
machine must be flat, well-maintained and with no
waste, such as sawdust and cuttings.
Errors in the machine, including the guard or the bla-
de shafts, must be reported to the person responsible
for safety as soon as they are discovered.
Familiarise yourself with the safe procedures for
cleaning, maintaining and regularly removing chips
and dust to reduce the fire risk.
Electrical connection / Electrical
safety
WARNING! Electric shock! There is a risk of
an injury caused by electric shock!
Defective cable or plug may cause electric shock.
Avoid body contact with earth parts to protect
yourself from electric shocks.
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Insert the plug of the electrical cable in a socket of
suitable shape, voltage and frequency complying
with current regulations.
ENGLISH
33