Advanced Bionics Slim HP Standard Mode D'emploi page 10

4. Then place the bottom side of the headpiece over the
internal magnet of your cochlear implant.
NOTE: For recipients of HiRes Ultra 3D implants, if
the headpiece repels or pushes away when brought
over the internal device, rotate the headpiece
back and forth as you move the headpiece closer
towards the implant. Once attraction is felt, adjust
the headpiece to the original orientation and place
on head.
NOTE: For recipients of HiRes Ultra 3D implants,
when in a magnetic field or when the headpiece is
removed, you may feel the internal components of
the magnet vibrate and/or rotate. This movement
is expected as the magnets are designed to rotate
in the presence of strong magnetic fields. This
movement may be noticeable and is not expected to
be uncomfortable.
Cables
Slim HP Standard has separate cables.
Attaching the cable to the sound processor
To attach the cable to the sound processor, hold the
headpiece cable by the cable's strain relief. Align the
connector on the cable with the connector on the sound
processor and gently push the cable into the sound
processor until it snaps into place.
8