switel T9 Mode D'emploi page 30

- Setting up -
3 Setting up
3.1 Safety Information
NOTE: Before setting up, it is essential that you read
the safety information at the beginning of this
manual.
3.2 Check contents of pack
The following items are supplied:
one telephone base
one telephone connecting
cable
one instruction manual
3.3 Connecting the telephone
Connect the telephone cable supplied to the
telephone socket and the telephone jack on the
underside of the telephone. Then feed the cable out
of the telephone housing through the cable guide
either towards the top or the bottom. Secure the
cable firmly in the cable duct. The telephone works
using the tone dialling system.
3.4 Wall mounting
Your telephone is also suitable for wall mounting.
Use two screws for fixing to the wall. Drill two holes
83 mm apart, and leave the screws protruding 5 mm
from the wall. Now place the telephone over the
screws and push down slightly.
30
one telephone receiver
one spiral cable