Publicité
Les langues disponibles
Les langues disponibles
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two size AA (R6) batteries.
AA '(R6)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
Using the remote control
The instructions in this manual refer mainly to the buttons on the
main unit. Buttons on the remote control with the same names
as those on the main unit can be used as well.
To use FUNCTION on the remote control
The FUNCTION substitutes for the function buttons (TAPE,
TUNER, AUWVIDEO, CD) on the main unit.
Each time FUNCTION is pressed while power is on, the next
function is selected cyclically.
*
PLAY on the remote control
The function is the same as that of <P
on the main unit.
FUNCTION
b PLAY
If the remote control is not going to be used for an extended
period of time, remove the batteries
to prevent
possible
electrolyte leakage.
The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor above DEMO/ECO is exposed to intense light, such
as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
POWER
(!) STANDBY/
ON
Remote
sensor
DEMO/ECO
PHONES
'L
Function
— buttons
To turn the unit on
Press one of the function buttons (TAPE, TUNER, AU)UVIDEO,
CD). Playback of the inserted
disc or tape begins, or the
previously tuned station is received (Direct Play Function).
POWER/O STANDBY/ON is also available.
To turn the power off
Press POWER/O STANDBY/ON
The unit will return to the ECO mode or clock display depending
on the. setting before you turn on the unit.
If the previous setting is DEMO, the unit will also return to the
clock display.
If the clock is not set, the unit will always return to the DEMO
mode.
DEMO (Demonstration)
mode
When
the AC cord
is connected,
the display
window
demonstrates the functions of the unit. When the power is turned
on, the DEMO display is overridden by the operation display.
To cancel DEMO mode
Press DEMO/ECO.
To re-activate
the DEMO mode, press DEMO/ECO until
the display window demonstrates the functions of the unit.
ECO (Power economizing)
mode
Setting this unit to power economizing
mode reduces power
consumption.
Press DEMO/ECO repeatedly
(during power off) until "ECO
MODE is displayed.
The display disappears and the indicator on the POWER/O
STANDBY/ON button lights up.
DIMMER mode
Press DEMO/ECO twice during power on.
The display is dimmer than usual, press DEMO/ECO again to
restore normal display.
Using the headphones
Connect the headphones to PHONES jack with a stereo mini
plug (03.5 mm,
'/8
inch).
No sound is output from the speakers while the headphones are
plugged in.
5
ENGLISH
Publicité
