Aiwa XR-M33 Mode D'emploi page 18

m
'J –
Refer to the operating instructions of the connected equipment
for details.
The connecting cords are not supplied. Obtain the necessary
connecting cords.
Consult your local Aiwa dealer for optional equipment.
... .P ~a,a,w,,~m)g,,,, L,8,a, *.-,. . , ."...:.~..y.~~:z----:, .-p.!
.,.w~ ~ ,."-: ! >..,-.,,:" ,,,, !,. ,,,,>
." "., ".-. "..
.. . ... . ..... . .,.X"..,srw. ,!,,W!!*,* '3%,
VIDEO/AUX JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, VCRs, etc.).
Connect the red plug to the VIDEO/AUX R jack, and the white
plug to the VIDEO/AUX L jack,
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
To play equipment connected to the VI DEO/AUX jacks, proceed
as follows
1
2
Press AUX/VIDEO.
"AUX appears on the display.
Play the connected equipment.
To change a source name in the display
When AUX/VIDEO is pressed, "AUX is displayed initially. It can
be changed to "TV or "VIDEO".
With the power on, press POWER/d STANDBY ON while
pressing AUX/VIDEO.
Repeat the procedure to select one of the source names.
I 7
ENGLISH