Publicité
Les langues disponibles
Les langues disponibles
4. MAINTENANCE (continued)
REPLACING THE LED LIGHT BULBS
Cut the power supply by turning the hood off. Wait for the LED lamps to cool. To prevent damage or to avoid
reducing the life of the new bulb, do not touch the bulb with your bare fingers. Replace the bulb by
manipulating with a tissue paper or cotton gloves.
If the new lights do not work, ensure that each lamp is properly inserted into its socket before requesting the
intervention of a service agent.
CAUTION:
LED lamps can only be replaced with a new LED lamp. The lamp rating must be equal to the one
already used. Make sure all the control switches are off and the hood is unplugged or that the breaker is
OFF.
STEPS:
• This range hood uses LED light fixture: 3W Max 12V LED
• Make sure the range hood is unplugged or turn OFF the breaker. Make sure the lights are cool to touch.
• Place a flat‐head screwdriver between the light housing and the hood body, gently pry up the light housing
and search for the metal clip.
• Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and discard the used
light fixture.
• Reverse the steps to install a new LED light fixture. Turn the breaker or hood ON to test for operation.
Light
Hood
5. SERVICE AND WARRANTY
AVG warrants the hood under ordinary residential use for one (1) year against defects in materials and
workmanship from the date of its original purchase. Please refer directly to your local retailer to honor your
warranty.
This limited in‐house warranty is not subject to improper installation, accident, misuse, neglect, fire, or other
external causes such as alteration, repair by unqualified personnel or commercial use.
For details on specific warranty issues, please contact our After Sales Service department:
T:450.963.1303/1.888.651.2534
info@agiservice.ca
Flat‐head
Screwdriver
25
Metal
Clip
P
ower
Plug
Publicité
