ISE SY-6802 Manuel D'utilisation page 25

EXERCISE MONITOR
SPECIFICATIONS:
TIME...................................................00:00 -99:59
SPEED(SPD)......................................0.0 -99.9KM/H (ML/H)
DISTANCE(DIST)................................0.00 -999.9KM (ML)
CALORIE(CAL)....................................0.00 -9999KCAL
ODOMETER(ODO)..............................0.0 - 9999KM (ML)
PULSE (PUL) ............................................0.40~240BPM
KEY FUNCTIONS:
MODE(SELECT/RESET): This key lets you to select and lock on to a particular function you want.
OPERATION PROCEDURES:
1. AUTO ON/OFF
The system turns on when any key is pressed or when it sensor an input from the speed sensor.
The system turns off automatically when the speed has no signal input or no key are pressed for
approximately 4 minutes.
2. RESET
The unit can be reset by either changing battery or pressing the MODE key for
3 seconds.
3. MODE
To choose the SCAN or LOCK if you do not want the scan mode, press the
MODE key when the pointer on the function you want which begins blinking.
FUNCTIONS:
1. TIME: Press the MODE key until pointer lock on to TIME. The total working time will be shown
when starting exercise.
2. SPEED: Press the MODE key until the pointer advance to SPEED. The current speed will be
shown.
3. DISTANCE: Press the MODE key until the pointer advance to DISTANCE. The distance of each
workout will be displayed.
Parameters:
Model: SY-6802(510R)
Rated Voltage: 3V DC
Battery Type: 1.5V AAA*2 (Does
not contain the battery)
Test Standard(s): EN55014-1
EN55014-2
11
EN