ISE SY-6802 Manuel D'utilisation page 21

FIG.6
#31 d8*
S13
FIG.7
9# M8*16 4PCS
31# d8* Φ 20*1.5 2PCS
15# d8* Φ 20*1.5*R15 2PCS
FIG.8
#33 M6*16 8PCS
#42 M8*45 2PCS
Φ 16*1.5 2PCS
#3 M8 2PCS
8
16
7
FIG.6:
Attach the back cushion (37) and the
cushion (44) to the cushion post (35) with
the bolt (33) and washer (34).
FIG.7:
Connect handle wire (45) with pulse
wire (27). Then, fix cover plate (43)
and handlebar (40) onto seat tube (35)
with carriage bolt (42), flat washer (31)
and domed nut (3).
FIG.8:
Connect the sensor line 11&18, handle
wire 10&19, and tension control wire
8&16, attach the tension control (8) to
the upping post with nut (5) and arc
washer (6). Install the support tube (7)
on the main frame (20) with arc washer
(15) and bolt (9) and washer (31).
EN