Festo DGE ZR-RF Série Notice D'utilisation page 43

DGE−...−ZR−RF
Place the safety limit switches in the
S
mechanical end positions (W).
At first the safety limit switches can still
be shifted in the longitudinal direction
(cable reserve; for accurate positioning
see chapter Commissioning").
Position the reference point switch
S
between both hardware limit switches
(accurate positioning: see chapter
Commissioning").
Avoid external influence caused by mag
S
netic or ferritic parts in the vicinity of the
reference point switch and the limit
switches.
In this way you can ensure that the
switches function faultlessly.
Avoiding dirt
Use cover rails in all unused grooves in
S
accordance with the chapter Accessories."
Fitting electric components
Connect the electric control elements (in
S
accordance with the relevant operating
instructions).
Connect the motor with the controller
(Z) and via an intermediately switched
amplifier with the mains voltage.
Festo DGE−...−ZR−RF 0707b English
Fig. 31
Fig. 32
M
Fig. 33
X
Z
43