Festo DGE ZR-RF Série Notice D'utilisation page 36

DGE−...−ZR−RF
Finding preferred handling steps for your application
First read completely through the section Fitting external accessories" in the
S
chapter Fitting."
You can then optimize the fitting procedure.
Fitting the product
Check the space required for fitting.
S
Mounting
position
Fig. 15
Place the DGE−...−ZR−RF so that all the
S
operating parts are accessible.
When the device is fitted in a vertical or diag
onal position:
Check whether additional external safety
S
measures are necessary (e.g. toothed
latches or moveable bolts).
For all applications:
Make sure that the device is fitted free of
S
mechanical stress and distortion (even
ness of mounting surface: 0.2 mm/30 cm).
36
Protection against the
penetration of drops (greases,
oils, water) and particles
Slight Medium
Vertical, diagonal Diagonal or
or horizontal with horizontal
toothed belt on with toothed
top belt at bottom
Fig. 14
Fig. 16
DGE
Fig. 17
Fig. 18
Festo DGE−...−ZR−RF 0707b English