Festo DGE ZR-RF Série Notice D'utilisation page 30

DGE−...−ZR−RF
2 Method of operation and use
The rotary movement of a motor is converted
by an internal drive element into a linear
movement. The drive element moves the slide
backwards and forwards.
The slide bearing is provided by rollers and
guide rods inside the cylinder barrel.
The DGE−...−ZR−RF is intended for the exact
and fast positioning of masses.
The DGE−...−ZR−RF is not permitted for use in
applications in which vegetable water−soluble
fats or oils could penetrate into the axis.
The DGE−...−ZR−RF has been designed to
operate in combination with the motor types
named in these instructions.
It is approved of for operation in slide mode
and yoke mode (observe loading limits).
3 Transport and storage
Take into consideration the weight of the
S
DGE−...−ZR−RF.
The DGE−...−ZR−RF weighs more than
120 kg, depending on the design.
Ensure storage conditions as follows:
S
short storage periods
cool, dry, shaded corrosion−protected
storage locations
absence of oils and fats, of fat solvent liquids and fumes.
In this way you can ensure the efficiency of the toothed belt.
30
Fig. 2
Fig. 3: Slide mode
Fig. 4: Yoke mode
Fig. 5
Festo DGE−...−ZR−RF 0707b English