General; Symbols; Operating Conditions; Transport And Storage - Aventics MSN-6 Mode D'emploi

2

General

2.1

Symbols

Observe the warnings and
information given
on the product
in these operating instructions
2.2

Operating conditions

Designated use
CAUTION! Operating the mini-slide within the
limits of its designated use involves
compliance with the operating conditions
prescribed by AVENTICS (e.g. forces,
moments, masses, speeds, pressure,
temperature range, etc.). These permissible
limits may not
be exceeded.
CAUTION! Unauthorized conversions or
modifications of the drives signify a safety risk
and are therefore not permitted. AVENTICS
cannot assume any liability for resulting
damage.
Observe the regulations, guidelines and
standards of, for example, professional
associations, technical supervisory
associations or corresponding regulations
effective in the country of use.
Medium
AVENTICS drives are designed for oilfree
operation when put to their
designated use.
Once you have selected a medium, abide by
that selection throughout the service life of
the product, e.g. always use oil-free
compressed air.
AVENTICS | MSN | R499050100–BDL–001–AB
Installation and initial startup
Maybe attended to only by qualified
personnel, in accordance with the
operating instructions.
2.3

Transport and storage

NOTICE! Pneumatic components typically
have elastomer seals. They are subject to
ageing, i.e. items stored for longer than 2
years no longer have the full life expectancy.
Ageing can be accelerated by heat and light
(UV irradiation).
3

Installation and Mounting

3.1

Mechanical

Damage
00117674
Handle the mini-slide in such a way as to
prevent damage to the slide guide, which
will reduce the service life.
Installation location
00117675
11