Bahco BBCE12-3 Mode D'emploi page 7

7.5 Do not face the battery when making the final connection.
7.6 Connect charger AC supply cord to electrical outlet.
7.7 When disconnecting the charger, always do so in the reverse order of the connecting
procedure and break the first connection while as far away from the battery as practical.
7.8 A marine (boat) battery must be removed and charged on shore. To charge it onboard
requires equipment specially designed for marine use.
8. AC POWER CORD CONNECTIONS
WARNING WARNING
DANGER
8.2
a proper outlet installed by a qualified electrician. An improper connection can result in a
risk of an electric shock or electrocution.
8.3 Recommended minimum AWG size for extension cord:
• 30.5 meters (100 feet) long or less – use an 1.0 mm
• Over 30.5 meters (100 feet) long – use a 1.25 mm
9. FEATURES
1
10. ASSEMBLY INSTRUCTIONS
10.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.
11. CONTROL PANEL
DIGITAL DISPLAY
The digital display indicates the status of the battery and charger. See Display Messages
for a complete list of messages.
BATTERY TYPE/LANGUAGE BUTTON
Press the button once to select lead-acid; twice for a lithium ion battery. To select the
language on the display, press and hold the button for 5 seconds (EN-FR-ES).
LED INDICATOR
GREEN LED solid: The charger is connected and is charging a battery.
GREEN LED pulsing: The battery is fully charged and the charger is in Maintain Mode.
GREEN LED flashing: The charge has aborted.
NOTE: See Operating Instructions for a complete description of the charger modes.
RISK OF ELECTRIC SHOCK OR FIRE.
8.1 This battery charger is for use on a nominal 230V, 50Hz circuit.
The plug must be plugged into an outlet that is properly installed in
accordance with all local codes and ordinances. The plug pins must
fit the receptacle (outlet).
NEVER alter the AC cord or plug provided – if it does not fit the outlet, have
2 3 4
7
2
(16 gauge) extension cord.
2
5
1. AC Power cord
2. Digital display
3. Battery type/language button
4. LED indicator
5. Hook attachment
6. Battery clamps (quick-connect)
6
7. Ring terminals (quick-connect)
• •
7
(18 gauge) extension cord.