Abus TVVR45030 Notice D'utilisation page 86

Notes on the operating instructions
Operating elements on the remote control
Note
Pay attention to the remote control diagram on
page 67.
No. Name
Function
20 DEV:
Assigns the remote control with the device ID
21 Alphanumeric keys:
 Selects the camera (channel) in the live view
 Entry of letters and digits in system fields
A:
22
Changes the entry format (upper / lower case,
symbols, digits)
PLAY:
23
Starts playback
VOIP:
24
 Not used
PREV:
25
Changes the screen display in the live view
Navigation keys:
26
During playback:
 ,  Sets the speed
 ,  Previous / next day
In the live view:
 Selects the camera (channel selection)
In menus:
 Navigation
ESC:
27
 Not used
No. Name
Function
Not used
28
Not used
29
Zoom +:
30
Zooms in on the image section in PTZ mode
F1:
31
In lists:
 Selects all available options
Zoom -:
32
Zooms out of the image section in PTZ mode
F2:
33
Switches between tabs
IRIS-: In PTZ mode:
34
 Closes the iris
Focus-: In PTZ mode:
35
 Brings the image section into focus
IRIS+: In PTZ mode:
36
 Opens the iris
Focus+: In PTZ mode:
37
 Brings the image section into focus
◄II: Pause / reverse playback
38
: Stops playback
39
PTZ:
40
Switches on PTZ control
Enter II:
41
 Confirms the selection
 Ticks / unticks the boxes
During playback:
 PLAY/PAUSE
Single play mode:
 Advances by a single frame
MENU:
42
 Calls up the main menu
 Switches the key tones on and off (press and
hold down for 5 seconds)
REC:
43
Opens / starts manual recording
INFO:
44
 Switches to another monitor in the live view
EDIT:
45
General use:
 Activates the text entry; backspace in text
fields
46
POWER:
Switches on/off (hold down for 5 seconds)
Mouse operation
Note
Further descriptions in these operating instruc-
tions are made with the mouse.
The device is suitable for use with a USB mouse.
Connect the mouse to the USB port.
Button Function
Left Single-click:

Selection in menu, activation of an entry
field or tab
Double-click:

Switches between the screen display of
single and multiple images in the live view
and during playback
Click and drag:

In PTZ mode: Camera control

Set-up of alarm areas or zones
Right Single-click:

Calls up the pop-up menu
Scroll In the live view:
wheel 
Shows previous / next camera
In menus:

Scrolls through the menus
86