Abus TVVR45030 Notice D'utilisation page 83

System operation
System operation
General information
The device can be controlled as follows:

Using the operating elements on the front of the
device

Using the remote control

Using the USB mouse
Operating elements on the device
Note
Pay attention to the overview on page 82.
No. Name
Function
Recorder operating keys:
1
MENU:
 Calls up the main menu
 Switches the key tones on and off (press and
hold down for 5 seconds)
REC:
 Calls up the menu for manual recording
PLAY:
 Opens the playback menu
ZOOM+:
 Zooms in on the image section in PTZ mode
ZOOM-:
 Zooms out of the image section in PTZ mode
 Switches the video output in live mode: Moni-
tor – Spot Monitor or Video Out – Video Spot
Out
FOCUS+:
 Sets the focus in PTZ mode
FOCUS-:
 Sets the focus in PTZ mode
IRIS+:
 Opens the iris
IRIS-:
 Closes the iris in PTZ mode
PTZ:
 Activates the PTZ control
MODE:
 Switches the screen view
KEYLOCK:
 Locks the control keys
USB ports:
2
For external USB 2.0 devices (e.g. mouse, ex-
ternal disk drive or DVR burner)
83
No. Name
Function
3 Camera selection keys (1, 2, 3...):
Displays the camera status:
 White: Camera is connected
 Blue: Connected camera is recording
 Not lit: No camera connected
In the live view:
 Selects the camera and displays the full-screen
view
4 Directional keypad:
During playback:
 ,  Sets the speed
 ,  Previous / next day
In the live view:
 Selects the channel
In menus:
 Navigation
OK key:
 Press and hold for 5 seconds to switch the de-
vice on and off
 Confirms the selection
 Ticks / unticks the boxes
During playback:
 PLAY/PAUSE
Increased/ decreased playback speed:
 Normal playback speed
5 Jog Shuttle:
During playback:
 Outer ring (shuttle ring) change playback
speed
 Inner ring to play single frames in single mode
In menus:
 Inner ring moves the cursor upwards / down-
wards
 Outer ring moves the cursor left / right
In the live view:
 Selects the channel
6 NVR status LED:
Displays the device status:
 White (constantly lit): System status is OK
 White (flashing): System status is OK, re-
cording settings are stored, surveillance mode
is active
 Blue (constantly lit): At least one camera is cur-
rently recording
 Red (constantly lit): System maintenance re-
quired
7 IR receiver:
For the remote control