Abus TVVR45030 Notice D'utilisation page 122

Settings - Configuration
Settings - Configuration
Note
The "Configuration" menu is used to manage all
device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead
to data loss!
Ensure a data backup has been made in good
time beforehand.
Overview
Menu Setting
General Language, video, time, date,
mouse pointer, password, time
zones and other settings
Network Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.)
Alarm Assignment and parameterisa-
tion of detectors to alarm inputs
and relay outputs
RS-232 Parameters on the serial con-
nection
Live View Display settings and assign-
ment of the event output
Warning Behaviour of the device in ex-
ceptional cases
(HDD full, network discon-
nected etc.)
User
Note
Pay attention to the instructions in the correspond-
ing sections.
General
"General" tab
Language
CVBS Output
Standard
Resolution
Time Zone
Page
Date Format
122
System
Date/Time
Mouse Pointer
124
Speed
Enable Wizard
125
130
Enable ID Au-
thentification
130
130
Adding and changing users,
assigning authorisation rights
Setting
Language on the OSD
PAL / NTSC
Resolution on the monitor
GMT (Greenwich Mean Time)
MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD
Date and time
Set on the scroll bar (left =
low speed; right = high speed)
Box not ticked:
Wizard will not appear after restart of
the device.
Box ticked:
Wizard will appear after restart of the
device.
Box not ticked:
In order to enter a menu no password
has to be entered. At access by net-
work the password has to be entered.
Box ticked:
Password must be entered in order to
use the menu.
130
122