Please read this owner's manual. It will tell you how to
use all the fine features of this microwave oven.
LOCATION OF MODEL NUMBER
To request service information or replacement parts, the
service center will require the complete model number of
your microwave oven. The number is on the oven front
as shown in the illustration below.
OVEN SPECIFICATIONS
MODEL NUMBER LABEL
Power Supply
Rated Power
Microwave
Consumption
Convection
Power Output Microwave
Convection
Rated Current
Microwave
Convection
Overall Dimensions(WxHxD)
Oven Cavity Dimensions
(WxHxD)
Capacity of Oven Cavity
ELECTRICAL REQUIREMENTS
The oven is designed to operate on a Standard
120V/60Hz household outlet. Be sure the circuit is at
least 15A or 20A and the microwave oven is the only
appliance on the circuit. It is not designed for 50Hz or
any circuit other than a 120V/60Hz circuit.
INFORMATION
120V AC, 60 Hz
1500W
1500W
*850W
1350W
13.0A
13.0A
29
" x 16
" x 15
"
15 /
7 /
3 /
16
16
8
21
" x 9
" x 14
"
1 /
7 /
3 /
4
16
16
1.7 cu.ft
GROUNDING INSTRUCTIONS
This appliance must be grounded. If an electrical short
circuit occurs, grounding reduces the risk of electric
shock by providing an escape wire for the electric
current. The cord for this appliance has a grounding wire
with a grounding plug. Put the plug into an outlet that is
properly installed and grounded.
WARNING
improperly, you risk electric shock.
Ask a qualified electrician if you do not understand the
grounding instructions or if you wonder whether the
appliance is properly grounded.
Because this appliance fits under the cabinet, it has a
short power-supply cord. See the separate Installation
Instructions for directions on placing the cord properly.
Keep the electrical power cord dry and do not pinch or
crush it in any way.
If it is necessary to use an extension cord, use only a 3-
wire extension cord that has a 3-blade grounding plug,
and a 3-slot receptacle that will accept the plug on the
appliance. The marked rating of the extension cord shall
be equal to or greater than the electrical rating of the
appliance.
Ensure proper ground
exists before use
For a permanently connected appliance:
This appliance must be connected to a grounded,
metallic, permanent wiring system, or an equipment
grounding conductor should be run with the circuit
conductors and connected to the equipment grounding
terminal or lead on the appliance.
- 6 -
-
If you use the grounding plug