10
SAFETY
10.1
Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be informed
about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Generation of 230V~/ 50Hz electricity for the power supply of electrical devices for private use as well
as for hobby and DIY projects outdoors, and generation of 12V DC electricity for charging 12V devices
within the specified technical limits. Before connecting the electrical devices, please check the
compatibility according to the respective manufacturer's specifications.
Any manipulation of the machine or its parts is a misuse, in this case
its sales partners cannot be made liable for ANY direct or indirect damage.
Ambient conditions
The machine may be operated:
humidity
temperature
max. altitude above sea level
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use:
The operation of the machine outside the stated technical limits described in this
manual is forbidden.
Operation of the machine function without safety devices is forbidden.
The use of the machine not according with the required dimensions is forbidden.
The use of the machine not being suitable for the use of the machine and not
being certified is forbidden
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in this user-manual
is forbidden.
The unattended operation on the machine during the working process is forbidden!
Never cover the running generator.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-STE3000IV
The generator is to be operated only with equipment whose voltage
specifications conform with the generator's output voltage.
The generator has an oil pressure protection. If oil level is low, it is not
possible to restart the engine.
Never connect the generator to the power supply (socket-outlet)!
Never connect the generator with other energy sources (generators)!
Never change the motor and machine settings.
WARNING
max. 70%
+5°С to +40°С (+41°F to +104°F)
1500m
SAFETY
ZIPPER-MASCHINEN
20
and