Télécharger Imprimer la page

EUROM 334289 Manual D'instructions page 37

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
14. Always fully extend the (extension) cable in order to prevent
overheating!
15. Only use the device if it has been properly secured to a wall or
ceiling. Make sure that you always use attachment materials that
are suitable for the surface you are working with; consult an expert
if required.
16. Never make any changes to the device, electrical cable or plug.
17. If this device is directly connected to the cabling of your electricity
installation, it must be installed by a competent specialist, taking
account of the valid laws and regulations and the instructions from
the energy company.
Warnings for use
1. Never cover or block the device; it will overheat and this could lead
to a fire risk. Never hang or place objects such as clothing,
blankets, cushions, paper, etc. on the device. The minimum
distance of 1 metre between the device and flammable materials
must always be applied.
2. The casing, particularly the front of the device, will get incredibly
hot during use. Never touch the device when it is on or shortly
thereafter; it could burn you! Make sure that the wind or other
environmental factors do not move any flammable materials into
the immediate vicinity of the device. This could include curtains,
tent canvas, flags, plastic film, etc. This could lead to burns or fire.
Make sure that they do not cover or block the device.
3. Do not store any flammable liquids or materials, such as paint,
petrol, gas bottles, etc. in the immediate vicinity of the device. Do
not use the device in an environment that poses a fire risk, e.g.
near gas tanks, gas pipes or aerosols. This is an explosion and fire
risk!
4. Never pull on the cable to remove the plug from the socket or to
move the unit.
5. Never stick fingers or pencils or any other objects into an opening
in the device.
6. Prevent the cable coming into contact with the device, oil, solvents
and sharp objects or becoming hot. Unroll the cable in full before
using the device. Check the cable regularly for damage.
7. Remove the plug from the socket if you do not plan to use the unit
for an extended period.
37

Publicité

loading