Channel 4 - Gobos; Projector Addressing (For Digital Signals); Dip-Switch Settings - Futurelight Scan SC-330 Mode D'emploi

4.1.4 Channel 4 - Gobos

0
1 - 45
46 - 63
64 - 127
128 - 132
133 - 135
136 - 140
141 - 153
154 - 166
167 - 179
180 - 191
192 - 204
205 - 217
218 - 230
231 - 243
244 - 255

4.2 Projector addressing (for digital signals)

Each projector occupies 4 channels. To ensure that the control signals are properly directed to each projector,
the projector requires adressing. This is to be done for every single projector by changing the DIP-switches as
set out in the table. The Test-switch starts the projector's self test. Use the Pan and Tilt-switches in order to
invert these two movements.
Projector No. & Channels
Projector 1 - Channels 1-4
Projector 2 - Channels 5-8
Projector 3 - Channels 9-12
Projector 4 - Channels 13-16
Projector 5 - Channels 17-20
Projector 6 - Channels 21-24
Projector 7 - Channels 25-28
Projector 8 - Channels 29-32
Projector 9 - Channels 33-36
Projector 10 - Channels 37-40
Projector 11 - Channels 41-44
Projector 64 -Channels 253-256
Closed
Dimmer
Full open position
Strobo effect slow to fast (max 8 FPS)
Closed in reverse position
Reset of the fixture
Closed in reverse position
Gobo (dichro) 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo 9

DIP-switch settings

1 8